Sunday, 20 November 2011

Installing the speedometer

Standard speedos like this are getting increasingly hard to find these days. This one, I know is working 100% although the housing and face are yellowing slightly I am going to use it. It is totally original and quite rare.















These are the markings you look for when hunting for a genuine Innocenti Speedometer.






























Insert the speedo into the headset top. It should be quite a snug fit. Make sure your headset top is on a nice soft surface with nothing to scratch it underneath.















Place on the retaining ring as shown.















and fasten down with three 5mm long screws which have round slotted heads.


at

2 comments:

  1. Mossy29 November 2011 at 10:53

    Paul
    i am restoring an Italian LI 150, the speedo like yours is in perfect working order if a little yellow, i would like to re use this, i have been told that i can't because it is KPH not MPH and it won't pass the MOT?? is this right??
    Thanks
    Mossy

    ReplyDelete
  2. Paul Slack29 November 2011 at 12:23

    Why not check with your local DVLA?

    ReplyDelete

All comments require verification before publication to prevent spammers!