Lambretta Restoration
The complete guide to stripping down & re-building Lambretta scooters.
Sunday, 20 November 2011
Rear footbrake install and setup
›
Installing the footbrake normally required the footbrake pedal, cable adjuster link, two washers and a circlip. Offer the pe...
Sunday, 13 November 2011
Badges and stickers
›
A few finishing touches to the days work for today. Here is an original petrol flap sticker, which is actually a very thin sheet of alumin...
Installing cut out button (kill switch)
›
Very simple job. Notice the kill switch has a bracket attached to the rear, inner section of the housing. It is held in place with a small...
1 comment:
Adding bridge piece
›
Bridge piece, two rubber strips, 2 25mm countersunk bevel head bolts, 2 8mm nuts, 2 countersunk washers, 2 washers. The pr...
1 comment:
Adding sidepanel handles and badges
›
Check first of all that the panels actually fit. It isn't unusual for them to get a little out of shape whilst being worked on in prep f...
Adding toolbox door
›
To add the toolbox door, you must first insert the two rubber buffers. This is the correct way around. Try poking them t...
‹
›
Home
View web version
